Eachine Wizard X220S FPV

Carbon fiber all the way in which

All structural components on the TBS VENDETTA are made out of custom-made carbon fiber layup. The arms are produced from flat 3.5mm thick carbon fiber plates, machined to specific requirements on a 4-axis CNC machine, absolutely chamfered to stop delamination. The physique is a pure murals, which begins its life as a hand molded tubular 2mm carbon fiber grasp. It’s trimmed down by a 4-axis CNC machine to save lots of weight. Easy and rounded edges within the CNC cuts are our approach of displaying off. The matte end is sand blasted, as a result of consideration to element requires it.

Tight integration, modular design

The whole FPV racer is constructed across the concept of numerous self-contained components working collectively hand in hand for a unified person expertise. Ranging from the TBS ZeroZero FPV digital camera, to the TBS POWERCUBE and TBS CORE PRO, the whole lot is repairable and not using a soldering iron, and with simply two instruments. This doesn’t stop you from configuring all tuning parameters by way of the built-in OSD, to altering VTx channels or energy ranges.

From field to air: 5 minutes

The TBS VENDETTA comes pre-tuned, and the R/C Calibration Wizard takes you thru the setup steps. Simply strap in a R/C receiver, tune your goggles to BOSCAM A CH1, and begin establishing your controls (each R/C receiver, goggles and FPV video receivers are offered individually). The arms arrive in indifferent state to permit fast entry to the R/C receiver bay the primary time.

Constructed to develop

From the structural rigidity to the over-powered ESCs, the whole lot has been developed along with your progress as a pilot in thoughts. A step to 6S with greater motors to achieve ridiculous power-to-weight ratios, {custom} arms for greater effectivity motors and props, or just a unique motor setup to fit your tastes are simply attainable, because of the MT30 connectors and the fast swap arms. You may even carry completely different pairs of arms with distinctive motor and props combos put in for each event, and mount what you fancy!

Options

• 240-sized RTF FPV Racer
• Fast-replace 3.5mm carbon fiber arms, MT30 connectors
• Cobra CM2204/2300kV Motors, HQ 5x4x3 Props
• TBS PowerCube with quickest F3 board out there, 2-6S succesful Bulletproof 30/50A ESCs
• Suitable with PPM, SBUS, XBUS, Spektrum R/C techniques
• Totally configurable by way of OSD, no PC required
• GoPro 3/4 and Mobius / Runcam mount included, each 10 and 30 diploma variations
• Misplaced mannequin alarm
• 410g weight with out Battery or HD digital camera